建てモ3D — Tatemo 3D

3D Preview

Live

プロパティ Properties

平面図 Floor Plan

Draw the footprint top-down. Walls (foundation + 水切り + body) are generated automatically.

0 pts · open · H=2.90m

天井 Ceiling

Press H. The ceiling is the upper face of each room's floor — set the level default here, then click a room to change its height, slope or cove.

エリア Area

Press F. Every closed room gets a Floor (and its ceiling) on its wall centre line. Drag corners and edges — walls and openings never move.

ラベル Room Labels

Room-name labels. Pick the Label tool (L) and drag a card onto a room; double-click a label to edit its text, unit and position here.

ピン Pins / Reference points

Reference points walls and roofs snap to. Pick the Pin tool (P) and click on the canvas to place; switch to Select (V) to pick, drag, or edit a pin.

屋根 Roof

部分壁 Wall Zone

Press Z. Click a wall near the side you mean, add a split height (FL+) and pick a material per band.

木製デッキ Wood Deck

Press D (or click Deck in the tool rail) on floor 1F. Drag a rectangle anywhere on the plan — the system builds 4 corner posts with footings, plus a plank slab on top. Heights and pillar sizes are adjustable per deck.

玄関階段 Genkan

Press G (or click Genkan in the tool rail) on floor 1F. Drag a rectangle adjacent to the entry wall — the side closest to a wall is the highest step. Total rise = foundation height − mizukiri − topGap. Step height divided proportionally by step count.

バルコニー Balcony

Press B (or click Balcony in the tool rail) to enter Balcony mode. Drag a rectangle next to a wall on floor 2F or above. Side closest to a wall becomes the open (door) side. Adjustable parapet height.

視点 Eye view

階段 Stair

Press K (or click Stair in the tool rail). Drag a rectangle inside a room: start at the FOOT, end at the TOP. Enclosing walls are added automatically.

窓 Windows

Press N (or click Window in the tool rail) to enter Window mode. Click an edge to place, drag to slide, Delete to remove. Click a window to edit it below — default type & size live in Customize (C).

戸 Doors

Press T (or click Door in the tool rail) to enter Door mode. Click an edge to place, drag to slide, Delete to remove. Doors always sit on the floor surface (no sill) — default type & size live in Customize (C).

Wall Layers (Japanese standard)

Values below = the 3D currently being built. Drag a slider or type a number (mm).